MS Robot Safety Fencing Manufacturer in Pune

Robot safety fencing is a physical barrier system typically constructed from mild steel frames and weld-mesh or solid panels installed around industrial robots and automated machinery. Its primary purpose is to prevent unauthorized personnel from entering the robot's operating envelope, thereby eliminating the risk of collision, entanglement, or other serious injuries. Robot safety fencing is mandatory under ISO 10218 and most national factory safety regulations for any robot with a payload exceeding 250 g or a speed exceeding 250 mm/s.

Contact Devidatt Enterprises with your floor plan, robot model, and required clearance dimensions. Our engineering team will design a custom fencing layout, submit drawings for your approval, and manufacture the panels in our Pune facility. We also offer site visits across Maharashtra for complex or multi-robot installations. Call +91 89753 83232 or email info@devidattenterprises.com to start the process.

Our robot safety fences are fabricated from mild steel (MS) square hollow sections for frames and posts, with weld-mesh, expanded metal, or clear polycarbonate infill panels. All steel surfaces receive a powder-coat finish for corrosion resistance. For harsh environments, hot-dip galvanizing is available. The choice of material depends on the application - weld-mesh panels allow visual monitoring of the robot, while solid panels provide additional protection from weld spatter or fluid splash.

By creating a defined, clearly demarcated boundary around robotic cells, safety fencing allows robots to operate at full speed and payload without the need for speed reduction triggered by proximity sensors or collaborative robot modes. This maximizes robot throughput. Simultaneously, it removes the distraction and stop-start interruptions caused by human proximity alerts, resulting in fewer production stoppages and measurably higher overall equipment effectiveness (OEE).

Robot safety fencing refers specifically to perimeter barriers that enclose an entire robotic work cell, keeping people completely outside the robot's reach zone. Machine guarding is a broader term covering any fixed or movable guard installed directly on or around a machine to prevent contact with its dangerous moving parts. Robot cells typically require both: perimeter fencing as the outer boundary and close-proximity guards on specific hazard points like grippers, conveyors, or press tools within the cell.

According to ISO 13857 and EN ISO 10218, the minimum safety fence height depends on the reaching distance to the hazard zone. For most industrial robots, a fence height of 1,800 mm (1.8 m) is the recommended minimum when the hazard is at floor level. Where robots operate above this height, the fencing must extend high enough to prevent over-reaching. Devidatt Enterprises manufactures panels from 1,500 mm to 2,400 mm and can supply taller modular extensions as needed.

Yes. While we are based in Pune (Dhankawadi), Maharashtra, we supply and dispatch robot safety fencing across India including Mumbai, Nashik, Aurangabad, Solapur, Chennai, Bengaluru, Hyderabad, Ahmedabad, and Delhi NCR. Installation support can be coordinated for Maharashtra and nearby states. Contact us for freight and lead-time details specific to your location.

In industrial safety, fencing refers to the installation of robust physical barriers around hazardous machinery or process areas to prevent accidental access. For robotic systems, safety fencing creates a clearly visible exclusion zone so that even during an unexpected robot fault or runaway, workers are protected by a sturdy physical barrier. Safety fencing is a key element of a layered risk-reduction strategy alongside light curtains, safety PLCs, and emergency stop systems.

Cost depends on the perimeter length, panel height, infill type (weld mesh, expanded metal, or polycarbonate), number of interlocked access doors, and finish. As a general guide, basic weld-mesh fencing starts in the range of a few thousand rupees per running metre, while fully interlocked, polycarbonate-viewing enclosures cost more per metre. Devidatt Enterprises provides a firm, itemised quote after reviewing your floor plan and robot reach envelope call +91 89753 83232 for a free estimate.